2005 - 2014 Mustang

S197 Mustang (05-14) Side & Rear Splitter Combo

Save some money with our Side & Rear Splitter Combo! Made from our tried and true Aluminum Composite Material, not only fit perfect, but have a nice aggressive appearance! Complimenting the Side Splitters, our S197 Rear Splitters are 1/4 inch...

2005-09 Mustang Gen 2 Adjustable Race Spoiler

Introducing our new and improved Gen 2 Double Adjustable Race Spoiler. They are fully CNC machined and we've added a middle mount for added strength. Angle is still adjustable from vertical back 60 degrees. For the new version we have also added a...

Heat Extractor- Hood Vent with crease

We now offer our heat extractor vent with a slight crease in center to match hoods with a rib down the middle. The vents are made from 6061 aluminum and come standard with stainless button head screws.  They ship flat and unpainted so you can...

2010-14 GT500 Wicker Bill Spoiler

Made from Aluminum Composite, our 10-14 GT500 Wicker Bill Spoiler (gurney-flap) is a nice addition to your GT500 spoiler.  It's  CNC cut, with a nice chamfer on the edges to provide a very finished edge that helps draw the eye.  

2005-09 GT500 Wicker Bill Spoiler

Made from Aluminum Composite, our 05-09 GT500 Wicker Bill Spoiler (gurney-flap) is a nice addition to your GT500 spoiler.  It's  CNC cut, with a nice chamfer on the edges to provide a very finished edge that helps draw the eye.  

Spoiler Mounts

Like our spoiler mounts but want to make your own spoiler?  Well, we have what you need!  These are the same 3D printed (carbon fiber infused nylon) mounts used on all of our spoilers, sold individually.  If you want a pair, order 2. ...

2005-14 GT Splitter (Short)

Made from Aluminum Composite this sport splitter is small enough you can mount it without needing support rods.  Perfect for people that want a slightly more aggressive appearance for their GT or V6.  Splitter will come with generic mounting...

2005-14 California Special/GT500 Rear Diffuser Race

Our s197 Race Diffuser fits California Special and GT500 bumpers.  Like the street version, this diffuser incorporates smooth curves on the bottom of the diffuser to help keep the air attached and provide increased downforce.  Unlike our street...

2005-14California Special/GT500 Rear Diffuser Street

Our newest s197 rear diffuser fits California Special and GT500 Mustangs.  This is our first rear diffuser made completely from ACM and matches our other aero products perfectly.  As with all of our diffusers, in the event of damage the Fins...

2005-11 GT Rear Diffuser for QUAD EXHAUST - Street

Our new s197 rear diffuser fits GT bumpers with QUAD EXHAUST. The Base is constructed 1/4 inch ABS plastic while the Fins are made from an Aluminum Composite Material (ACM) this gives the fins a high quality smooth black finish. The diffuser does not...

2005-08 Street Spoiler

Made from Aluminum Composite Material (ACM) the spoiler uses Carbon Fiber infused 3d printed mounts that use the factory spoiler holes.  We do plan on offering a more aggressive race version in the near future if this is too small for your...

2005-14 GT500 - Front Splitter

This splitter is designed to mount underneath the GT500 front chin spoiler.  It is made from 1/4" Aluminum Composite Material (ACM).  Splitter rods are required (not provided).     

Heat Extractor- Hood Vent

Our new heat extractor vents were designed specifically for the GT350 hoods.  However,  they fit amazingly well on other hoods like the sn95 cobra r hood as shown.  The vents are made from 6061 aluminum and come standard with stainless...

2005-14 CDC Classic - Front Splitter

This splitter is designed to mount underneath the CDC Classic (and other similar) front chin spoiler.  It is made from 1/4" Aluminum Composite Material (ACM).  Splitter rods are required (not provided).     

2005-14 Boss 302 - Front Splitter

Front splitter that mounts under the Boss Chin spoiler.  Made from sturdy Aluminum Composite Material (ACM)

2005-14 Rear Side Splitters

1/4 inch ACM machined to match the profile of side skirts.  Designed to match the S197 Side Splitter.  Mounting hardware is included.   Sold as a pair.

2005-14 Side Splitters

1/4 inch ACM machined to match the profile of side skirts. Installation instructions and hardware included. Sold as a pair.

2005-14 California Special - Front Splitter

2005-14 GT Splitter (long)

Made from Aluminum Composite this sport splitter is longer and more aggressive than our Short version.  This splitter will generate enough downforce that support rods ARE required!  We recommen using Fully Torqued Racing support rods. ...

Splitter Rod Mount

Mount for attaching splitter rods to metal bumper support.  Does not include Support Rods.

Medium Fender/Hood Vents

These are our Aluminum Fender/Hood Vents, they are sized perfect for 1999-04 Fenders, but fit great on other models as well (sn95 fenders, and S197 CS Hoods for examples).  They ship flat and unpainted so you can use the parts as their own...

Large Hood Vents

These are our Largest Aluminum Hood Vents, they are sized perfect for 1999-04 Mach1 Hoods, but also fit nicely on the SN95 Hoods and we are sure they will fit many other applications.  They ship flat and unpainted so you can use the parts as their...

2005-11 GT Rear Diffuser - Street

Our new s197 rear diffuser fits GT bumpers. The Base is constructed 1/4 inch ABS plastic while the Fins are made from an Aluminum Composite Material (ACM) this gives the fins a high quality smooth black finish. The diffuser does not need to be painted...